Menu

Mold & Mildew Clean

$29.00$400.95 $25.95$400.95

Clean mold and mildew from any surface with our mold and mildew cleaner.

Coverage:
– 2lbs will treat 600-800 sq ft
– 4lbs will treat 1,200-1,600 sq ft
– 10lbs will treat 3,000-4,000 sq ft
– 40lbs will treat 12,000-16,000 sq ft

Clear
  • * Size:

    Reset options
    Notice: A Tint Color must be selected or the default color (Clear) will be shipped.
Save 10% Now by Sharing!
Give us a review on Social Media and immediately get a 10% rebate on your order!


Seal It Green 100% Biodegradable Mold & Mildew Clean

Overview:

Seal It Green Mold and Mildew Clean is a hydrogen peroxide based solution and when mixed with water disperses millions of tiny bubbles in every groove, pore, and crevice. Seal It Green Mold and Mildew Clean is biodegradable and will not harm the plants and grass around the house. These bubbles lift the mold, mildew, or dirt to the surface for easy cleaning allowing the use of a garden hose or a low pressure power washer to rinse with.

Seal It Green Mold and Mildew Clean is biodegradable and will not harm the plants and grass around the house.

Coverage:
– 2lbs will treat 600-800 sq ft
– 4lbs will treat 1,200-1,600 sq ft
– 10lbs will treat 3,000-4,000 sq ft
– 40lbs will treat 12,000-16,000 sq ft

Directions:

Dissolve ½ cup of Seal It Green Mold and Mildew Clean per gallon of hot water. Stir the solution in hot water until the solution is fully dissolved. You can either scrub the affected area or use a light power washer until the mold and mildew are removed. We recommend using a power washer at a light setting as this is simpler. You can use a mop, broom, or garden sprayer on affected area and let the solution sit for minimum of 30 minutes, for heavy mildew or mold let solution sit for an hour.

Inside the home uses include:
Tub, tile, toilet, sink, shower, spas, dishwasher, coffee pots, liter boxes, pet cages, refrigerator, wastebasket or any area where mold, mildew, stubborn stains or offensive odors are found, it’s also great in the washer machine to brighten clothes, without discoloring them.

Outside the home uses include:
Vinyl or aluminum siding, gutters, window sills, patio furniture, grills, coolers, trash barrels, decks, patio stones, driveways, walkways, stairs, steps, mailboxes, RV’s, boats, tents, or any where mold, mildew, dirt, grime, stubborn stains or offensive odors are found.

Cleaning up from a flood:
Floods cause massive amounts of damage to a home and proper cleanup in very important or you will end up with a mold problem potentially worse than the flood, some mold problems become so bad that demolition of the property is the only choice left. To avoid that from happening to your home follow my flood cleaning instructions and you can avoid the mold issues that will not only damage your home but could lead to severe health problems.

Flood cleanup step 1:

Remove all of the standing water; the best method is to first run a water transfer pump that will pump the water from the basement or flooded area out away from the home. Make sure that you disperse the water far enough from the home and watch the water to ensure that it runs away from the home. Once the all of the standing water is removed use a “wet vac” and mops to remove the remaining water.

Flood cleanup step 2:
Apply Seal It Green Mold and Mildew Clean to prevent any mold from growing or to remove any mold that has started to grow. Seal It Green Mold & Mildew Clean is also a great cleaning agent, it has a percentage of soap in the ingredients to help clean, there is no need for multiple cleaning products the Seal It Green Mold & Mildew Clean can handle the whole job. The product comes in a powdered form and when mixed with water millions of tiny bubbles are created and the bubbles get deposited deep in carpets, in any pores in concrete or wood and help lift all of the dirt and fungus to the surface to be cleaned off. Seal It Green Mold & Mildew Clean is made with hydrogen peroxide and hydrogen peroxide will clean better than bleach and without all of the negative side effects of cleaning with bleach, it will not stain any surface, there are no fumes like there are with bleach, there is no chemical odor in fact the Seal It Green Mold & Mildew Clean has a fresh citrus scent and most importantly we formulated the Seal It Green Mold & Mildew Clean to clean from the bottom so that every spore and every bit of debris gets removed, bleach on the other hand only cleans “topically” and is not a “long term” cleaning solution. Use a mop, sponge or a “garden style pump sprayer” to apply the Seal It Green Mold & Mildew Clean to walls, floors or any surface, let the product work for 15-20 minutes on the target surface, work into the surface with a deck brush or some tool to lightly scrub the area if it’s necessary, if there is no fungal growth than scrubbing can be eliminated just coat the surfaces well and let the product go to work, it’s a good idea to let the product remain on for 3 or 4 hours before starting the removal process, remove with a “wet-vac” or mop.

Flood cleanup step 3:
Completely dry the area with fans, the area should be 100% dry, no moisture at all should remain in the flooded rooms, you can also place a dehumidifier to help remove any moisture from the air.


Other products you may be interested in:

Weight 8 lbs
Size:

2 lb, 4 lb, 10 lb, 40 lb

Reviews


There are no reviews yet.

Be the first to review “Mold & Mildew Clean”